I have just sent password information to the email address I have on file for
all customers.
Some of the records will have data posted - others I am still posting.
Try it out - if you are in a hurry send me a PM and I will work on your record earliest.
If you have ordered IW products and did not get an email send me a PM.
Any questions you can send me a PM or post here.
Larry
I received the email. Has there been a problem?
Hello Larry,
i received 2 mails and both didn't work for now, i can't connect . . .
Dominique
Same here, except I got only one mail.
Unfortunately, cannot enter the site.
Barney
PM sent already Larry same problem as the others
Regards
Dave
Larry:
I guess I am having the same difficulty.
The login ID and initial password did not work. I tried several times including just copying and pasting the login ID and password. I may be locked out now, but in any event, I cannot get into my account.
Any suggestions?
Logman
Seems the force reset on first login is causing Issues.
I reset all the people who sent me an email or posted here so far.
I usually only get to work on this stuff 1-2 hrs per day so sometime
I may seem reallllllyyyyy sloooooow :)
Thanks
Larry
Have another go - I can login now ;D
Still can't change the temporary password though.
Graham :)
Fixed the pw change issue - should work now.
Helps if you have the correct code in place.
Larry
Larry where do I use my login and password :-\
@Pip1957,
A link to the website was provided in the mail you received.
Note - lots of stuff has not been loaded yet.
Only products purchased since I took over IW would be included.
Larry
logged in successfuly.
I see only IWbasic 2, but non of the other IW products I have purchased.
Haim
Larry..
I, too, have repeatedly tried to log in to the customer page, and failed. I even tried it not 10 minutes ago.
whitenite1
Sorry Larry but none of my passwords works . . .
I received two : one for iwbasic and one for aurora !
Dominique
Quote from: DominiqueB on September 15, 2011, 11:20:46 AM
Sorry Larry but none of my passwords works . . .
I received two : one for iwbasic and one for aurora !
Dominique
That's not the password he said use, is it?
LarryMc
i received two mails from larry:
both contains usernames and passwords (same username but two passwords) for the two product i paid from him.
Both don't work and i can't log . . .
Dominique
I sent you a pm with the correct login and password.
Keep me posted if you have issues.
Larry
Ok, i can log in now :-) thank's Larry !
Dominique
Seems fine now - thanks Larry .. ;D
Graham
I have finished loading the Aurora, CB and IWB records - if I missed you let me know.
Now doing Designer records.
Larry
I logged on and downloaded it just fine when I received the email. I didn't try to change my password.
Later,
Clint
FYI - I just updated the release IWBasic.
The Beta testing on the latest version is completed.
I replaced the IWBasic with the updated version - so download it.
If there are any issues I will put back the previous version.
We try to test but it seems there is always that one or two
conditions we miss - please keep me posted about this release
so we can better serve the IW community.
Also - how do you like the new Customer system?
Larry
Sorry, but could one remember me the new download page,
i only conserved the password but put away the site adress ! ! !
Thank's
Dominique
Larry,
Just updated to 2.095 from the Customer Page. Sign-on and password
worked perfectly. No problems compiling so far
Many thanks,
Brian
Just updated to 2.095
I tried for example the AppBar sample, or the browser_test2 sample . . .
And they shows many warnings ! ! !
Dominique
The warning reporting is much better than it use to be.
Usually the one that is reported the most is handler routines missing the ",int" on the end of the SUB line.
LarryMc
So we don't have to be affraid of it ?
Compiling...
appbar.iwb
File: C:\Mes Programmes\iwbdev2\projects\appbar.iwb (30) Warning: Argument 9 (handler) does not match the declaration of IWBWNDPROC
Different return type: none, should be int
File: C:\Mes Programmes\iwbdev2\bin\iwbstd.incc (10) Warning: See previous declaration of IWBWNDPROC
File: C:\Mes Programmes\iwbdev2\projects\appbar.iwb (69) Warning: See previous declaration of handler
File: C:\Mes Programmes\iwbdev2\projects\appbar.iwb (372) Warning: Array 'pArray' has only 1 dimension, you requested 2. Varyable type is pointer.
File: C:\Mes Programmes\iwbdev2\projects\appbar.iwb (318) Warning: See previous declaration of pArray
No Errors
Linking...
IWBasic Linker v1.11 Copyright © 2011 Ionic Wind Software
Generating C:\Mes Programmes\iwbdev2\projects\appbar.exe
Build completed
And why is there a warning about the "iwbstd.incc" that is not included in tha Appbar sample ?
Whith the Compiling... of browser_test2.iwb i get all of this . . .
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (96) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (97) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (100) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (101) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (102) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (103) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (104) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (107) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (110) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (111) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (112) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (113) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (115) Error: syntax error
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (138) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (139) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (145) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (146) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (149) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (150) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (175) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (199) Error: syntax error
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (200) Error: syntax error
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (201) Error: syntax error
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (210) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (213) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (216) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (219) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (222) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (225) Error: syntax error - ,
File: C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb (228) Error: syntax error - ,
Error(s) in compiling "C:\Mes Programmes\iwbdev2\projects\browser_test2.iwb"
Thank's for your clarifications :-)
Dominique
"iwbstd.incc" is automatically included in every IWB program you compile, regardless of the type
It is full of code that defines all the IWB functions that are located in the iwbstd.lib.
the warning is telling you that handler routines are suppose to be declared as returning an int.
The old compiler would only warn of non-handler routines that weren't defined properly.
That made it inconsistent. Now it is consistent with its warning concerning ther proper declaration of subroutines that return values.
As for browser_test2.iwb
Sapero is out of pocket and I can't ask him if that is what he really intended
All the lines that are giving the errors are all related to the use of that WITH command.
The solution that will get rid of all those errors, regardless of whether the are due to a bug or are intended to be that way, is to put ( ) around the entire list of parameters for the command. to prove that would fix it I went ahead and modified the file and it is attached.
LarryMc
Ok,
thank's a lot !
Dominique
Hello,
I lost my customer page information (the link to it) and do not know how to upgrade to IWB 2.095
Please help :(
Haim
Sent you PM with info.
Let me know if all is OK or not.
Larry
This is really good. Great work. Much better than trying to look for original registration emails to download an update.
Thanks!
Quote from: Rock Ridge Farm (Larry) on September 16, 2011, 08:04:08 AM
Also - how do you like the new Customer system?
Larry