this is part of the code which sets up the variables, the variable [number] is set to either 75 or 90 depending on users input.
if number = 90 THEN
colums = 10
rowes = 10
ENDIF
if number = 75 THEN
colums = 15
rowes = 6
ENDIF
if sw >=1020 and sh >= 768 and number = 90 THEN
cc = 50
numw = 470
numl = 430
ENDIF
if sw >= 1020 and sh >= 768 and number = 75 THEN: /* sw= screenwidth */
numw = 700 /*numw = width of 10 numbers with cc [50] spaces between each number */
numl = 250 /*numl = height of numbers, ie 8 rows with cc spaces between each */
cc = 50 /* cc is the space between each column and row, also with cc+20=start row */
ENDIF
now when i run the code listed below, i get a perfect display of 10 columns x 9 rows ; ie numbers 1 to 90.
but . WHY?, do i only get 6 columns x 5 rows instead of 15 columns x 5 rows ; ie numbers 1 to 75
r= cc +20 /* cc = 30 or 40 or 50, space between displayed numbers*/
for y=1 to number step colums /* 10 or 15 numbers per row*/
c= (sw-numw)/2 /* column start sw=1280 numw=700 if number=75 else = 470 */
for x=1 to rowes
z=x+y-1
SETLINESTYLE w1, @LSSOLID, 2
CONTROL w1,@STATIC,ltrim$(str$(z)),c,r,20,18,1, z
SETCONTROLCOLOR(w1,z,RGB(20,20,20),RGB(0,50,0))
circle w1,c+10,r+10,15,rgb(0,0,0),rgb(0,50,0)
c=c+cc
next x
r=r+cc
next y
any clues, if it works for one set of numbers, then ; in theory; it should work for the 75 numbers.
Because each set depends on the same variables.?
Regards.
Hugh
Simple answer:
90/10 = 9
colums = 10, y=1, 11, 21, 31, 41, 51, 61, 71, 81 (9 columns)
75/5 = 15
colums = 5, y=1, 6, 11, 16, 21, 26, 31, 36, 41, 46, 51, 56, 61, 66, 71 (15 columns)
change colums = 5 for number = 75, that will give you the 15 you are looking for.
Also, note that cc = 50 in both cases, which means you could just replace cc with a constant 50.
Bill
Thank you Bill,
My rows of numbers are; when (colums = 10 and rowes = 10
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
last row;
81 82 83 84 85 86 87 88 89 90;
ie the code i have works perfectly for the above display,
Now i ; i changed one thing and one thing only in the if number = 75
I changed (rowes) from [6] to [15] ; and left the colums the same , at 15,
with that i now have numbers from 1 to 15 in the first row
and continues down to the last row, with the last row of 15 numbers from 61 to 75
I am happy enough with that.
thanks for your help Bill
Regards
Hugh